ADP5054ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad, CSP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP5054 |
| Function | Step-Down |
| Number of Outputs | 4 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 4.7mA |
| Output Configuration | Positive |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15.5V |
| Control Features | Enable, Frequency Control, Power Good |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~2MHz |
| Max Input Voltage | 15.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Duty Cycle | 50 % |
| Max Junction Temperature (Tj) | 125°C |
| Output Phases | 2 |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP5054ACPZ-R7 Overview
This switching controller fits most application requirements since it is packaged in a 48-WFQFN Exposed Pad, CSP package. There is sufficient capacity to generate switching controller for outputs 4. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. The system can process Transistor Driver dc switching's outputs (s). 4.5V~15.5V is the supply voltage and the operating voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. It can switch at 250kHz~2MHz. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Frequency Control, Power Good is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. There are a QUAD terminal on the switching converters. Different dc switching's functions can be applied to 48 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Search for "ADP5054" to find other relevant dc to dc converter ics. In total, switching converter has 48 pins. If you are starting a new project, you should note the dc dc regulator's typical output current is 12A. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 15.5V. In order to limit the voltage of a dc switcher whose maximum input voltage is 15.5V, it must be limited by the user. 4.5V is the required supply voltage. This the controllers dc receives a 4.7mA nominal current supply.
ADP5054ACPZ-R7 Features
Transistor Driver Outputs
Switching Frequency: 250kHz~2MHz
Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
ADP5054ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP5054ACPZ-R7 DC to DC converter applications.
- Machining centers
- Electrical power transmission
- Smoke exhaust equipment
- Correction machines
- Grinders
- Packaging
- Scientific testing
- Arc suppression circuits
- Various precision measuring detectors
- Cutting machine tools
