ADP5062ACPZ-1-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | DMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP5062 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Voltage | 4.2V |
| Max Output Current | 2.1A |
| Power Supplies | 3.6V |
| Number of Channels | 1 |
| Interface | I2C, USB |
| Max Supply Voltage | 6.7V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Output Current | 1.3A |
| Adjustable Threshold | YES |
| Max Output Voltage | 5V |
| Nominal Input Voltage | 6.7V |
| Min Output Voltage | 4.3V |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 4.3V |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP5062ACPZ-1-R7 Overview
It comes in the package?of a Cut Tape (CT). To make it easier for you, it is included with the 20-WFQFN Exposed Pad, CSP package.Mounting type for the device is Surface Mount.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The device relies on an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT to operate.If the device needs to be charged, it must be supplied with Constant - Programmable current.There are related parts for this device under the base part number ADP5062.It has 20 terminations.There is a setting of 4.3V for the battery pack.There are 20 pins on it, so it has a very simple design.There are 20 pins required in order for the product to function.It appears that there are 1 channels available at this time.In theory, it should be able to run on a battery that has a voltage of 5VV.6.7V supply voltage is not a problem for it.There is a possibility of high efficiency if the output voltage is set to 4.2V.Operation is done using a 1.3A output current.There is one subcategory of this device, and it is Power Management Circuits.The device can operate at as low a supply voltage as possible, such as 4V.In order to mount it, it has to align itself with Surface Mount.There is 3.6V power supply set for the part.It appears that there is 2mA current flowing through the supply of the gadget at the moment.It is required that a maximum supply voltage of 5V be applied as the output voltage for this operation.During operation, the maximum output current is reduced to 2.1A.
ADP5062ACPZ-1-R7 Features
Battery pack voltage of 4.3V
1 channels
Power Management Circuits subcategory
20-WFQFN Exposed Pad, CSP package
ADP5062ACPZ-1-R7 Applications
There are a lot of Analog Devices Inc. ADP5062ACPZ-1-R7 Battery Chargers ICs applications.
- Charging cradle for wearable devices
- GPS tracker
- Man lift
- Personnel carriers
- Floor scrubber
- Electricity bank
- Electrical Utility industry
- Modern LA
- Automotive battery charger circuits
- Military equipment
