ADP5071ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP5071 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Type | Adjustable |
| Operating Supply Voltage | 15V |
| Voltage - Input (Min) | 2.85V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive and Negative (Dual Rail) |
| Current - Output | 1.2A 2A |
| Max Output Voltage | 39V |
| Voltage - Output (Min/Fixed) | 0.8V 1.6V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.2MHz 2.4MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.6V |
| Switcher Configuration | PHASE-SHIFT |
| Voltage - Output (Max) | ±39V |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP5071ACPZ-R7 Overview
For optimal performance, this voltage regulator makes use of the Tape & Reel (TR) package. As you can see, this harley voltage regulator contains 20 terminations. A DUAL SWITCHING CONTROLLER type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Space-saving 20-WFQFN Exposed Pad, CSP packages are available for this harley voltage regulator. There are 2 outputs configured on this voltage regulator 12v. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. Switching regulators like this one can be mounted on the Surface Mount mounting system. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. This voltage regulator 12v reaches a switching frequency of 1.2MHz 2.4MHz. The voltage regulator can be operated with a voltage as low as 2.85V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.8V 1.6V. As a result of the 1.2A 2A output current, voltage regulator offers maximum flexibility in design. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 5V is provided. In this case, the DC/DC regulator belongs to the family ADP5071. In order to operate voltage regulator, there are 20 pins that must be connected. The output voltage of this voltage regulator 12v should at least be set at 1.6V volts at all times. The maximal output voltage of ±39V allows adjusting voltage regulator for simple operation. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 39V. Switching regulators such as this operate from voltages of 15V.
ADP5071ACPZ-R7 Features
2 outputs
Peak reflow temperature (Cel) of 260
20 pins
Operating supply voltage of 15V
ADP5071ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP5071ACPZ-R7 Voltage Regulators applications.
- Combined machine tools
- Flaw detection equipment
- Solar power plants
- Current source circuits
- Smoke prevention equipment
- Domestic water pumps
- Die casting equipment
- Sink circuits
- Handheld GPS
- Special machining machine tools
