ADP8860ACBZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, WLCSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP8860 |
| Pin Count | 20 |
| Number of Outputs | 7 |
| Qualification Status | Not Qualified |
| Efficiency | 88 % |
| Max Output Current | 60mA |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 60mA |
| Voltage - Output | 4.3V~5.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 60mA |
| Current - Output / Channel | 30mA 60mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Number of Segments | 9 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.6mm |
| Length | 2.35mm |
| Width | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP8860ACBZ-R7 Overview
The 20-UFBGA, WLCSP package is used for saving board space. LED drivers have a total of 7 outputs that are used in the design of the drivers.To mount, use Surface Mount.With high reliability and efficiency, this emerges as a DC DC Regulator.When the temperature is -40°C~85°C TA, it can work normally.The benefits of Backlight are considerable.The system operates on the basis of the frequency 1MHz.For its operation, terminations with a value of 0 are used.To form its configuration, there are 20 pins.The number of segments is estimated to be 9.I have mounted it by Surface Mount.Under the base part number ADP8860, you'll find this LED driver.5.5V is an acceptable maximum value for the supply voltage.This device produces a voltage of 4.3V~5.5V volts.There are 20 pins on it.Further, its characteristics allow it to be classified as Display Drivers.It operates at a voltage of 2.5V as its minimal input voltage.A minimum supply voltage of 2.5V is required to meet the highest efficiency standards.In terms of supply current, 5.5V is the maximum value.You can supply 60mA current to the load.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 60mA.
ADP8860ACBZ-R7 Features
Available in the 20-UFBGA, WLCSP package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
ADP8860ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP8860ACBZ-R7 LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- Sports Facility Lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Architectural lighting
- Portable lighting
- Museum lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
- Medical surgery lighting
- Scanners and Handy Terminals
