ADP8860ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Supplier Device Package | 20-LFCSP-VQ (4x4) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | DC DC Regulator |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Backlight |
| Frequency | 1MHz |
| Base Part Number | ADP8860 |
| Number of Outputs | 7 |
| Efficiency | 88 % |
| Max Output Current | 60mA |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 240mA |
| Voltage - Output | 4.3V~5.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 60mA |
| Current - Output / Channel | 30mA 60mA |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 9 |
| Switching Frequency | 1MHz |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.5V |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP8860ACPZ-R7 Overview
Save board space with 20-VFQFN Exposed Pad, CSP package. For the design of these LED drivers, 7 outputs are used.Surface Mount is used to mount the led driver.In this case, the DC DC Regulator emerges as highly efficient and reliable.This LED driver can be operated at a temperature of -40°C~85°C TA. Backlight has considerable advantages.Frequency 1MHz is the basis of operation.It has a base configuration of 20 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 2.5V.There are 9 segments.Surface Mount has been mounted with the device.This LED driver has the part number ADP8860.5.5V is an acceptable voltage.In this device, the output voltage is 4.3V~5.5V volts.In this case, the maximum value will be 5.5V.When the input voltage is set to 2.5V, it operates.The system works with a minimum supply voltage of 2.5V in order to achieve maximum efficiency.When the maximum supply current is allowed, the value reaches 5.5V.It is important that the operating temperature not exceed 85°C in order to ensure stable operation.Loads can only be powered by 240mA current.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.The electronic component can function fully when the switching frequency is maintained at 1MHz.A LED driver that operates at 60mA output current provides all the benefits of a LED driver.
ADP8860ACPZ-R7 Features
Available in the 20-VFQFN Exposed Pad, CSP package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Switching frequency of 1MHz
ADP8860ACPZ-R7 Applications
There are a lot of Analog Devices Inc. ADP8860ACPZ-R7 LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- Panel lighting
- Medical surgery lighting
- Portable lighting
- Linear fluorescent
- Stage and Studio lighting
- Down lighting
- Amusement Machines
- Gallery lighting
- Down lights
