ADP8863ACBZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, WLCSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP8863 |
| Pin Count | 20 |
| Number of Outputs | 7 |
| Qualification Status | Not Qualified |
| Max Output Current | 30mA |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Output Current | 60mA |
| Voltage - Output | 4.3V~5.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 60mA |
| Current - Output / Channel | 30mA 60mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | I2C |
| Number of Segments | 7 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.645mm |
| Length | 2.355mm |
| Width | 1.96mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP8863ACBZ-R7 Overview
Its 20-UFBGA, WLCSP package is used to save board space. LED drivers with this design have 7 outputs.The led driver mounting is done by using Surface Mount.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.The led light driver is capable of working normally at -40°C~85°C TA.It provides considerable benefits for Backlight.This system operates at 1MHz frequency.It operates with 20 terminations.The base is configured with 20 pins.There are estimated to be 7 segments.It has been mounted on Surface Mount.You can find this LED driver under the base part number ADP8863.It is acceptable to have a maximum voltage of 5.5V.The voltage at the output terminal is 4.3V~5.5V.In this device, there are 20 pins.Further, it can be classified as Display Drivers based on its characteristics.As its minimal input voltage, it operates at a voltage of 2.5V.It reaches 5.5V when the maximum supply current is allowed.There is no current that can be supplied to the load.When operating with a 30mA output current, the LED driver delivers all the benefits.
ADP8863ACBZ-R7 Features
Available in the 20-UFBGA, WLCSP package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
ADP8863ACBZ-R7 Applications
There are a lot of Analog Devices Inc. ADP8863ACBZ-R7 LED Driver ICs applications.
- Amusement Machines
- Panel lighting
- Auxiliary lights for on-vehicle cameras
- Scanners and Handy Terminals
- High-end retail lighting
- Museum lighting
- LED backlight driver for LCD displays for portable equipment
- White LED Backlight for portable equipment
- Portable lighting
- A- lamps
