ADS1115QDGSRQ1
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | PGA, Selectable Address |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Other Converters |
| Max Power Dissipation | 900μW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADS1115 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Bipolar |
| Configuration | MUX-PGA-ADC |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Power Dissipation | 900μW |
| Number of Bits | 16 |
| Input Type | Differential, Single Ended |
| Architecture | Sigma-Delta |
| Number of Inputs | 2, 4 |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Single |
| Reference Type | Internal |
| Data Interface | I2C |
| Resolution | 2 B |
| Sampling Rate | 860 sps |
| Voltage - Supply, Analog | 2V~5.5V |
| Voltage - Supply, Digital | 2V~5.5V |
| Number of Analog In Channels | 4 |
| Sampling Rate (Per Second) | 860 |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Integral Nonlinearity (INL) | 1 LSB |
| Conversion Rate | 860 sps |
| Analog Input Voltage-Max | 4.096V |
| Output Format | SERIAL |
| Max Supply Voltage (DC) | 5.5V |
| Min Supply Voltage (DC) | 2V |
| Analog Input Voltage-Min | -4.096V |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS1115QDGSRQ1 Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 4 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 860 Hz.The input type of this electronic AD converter is Differential, Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Other Converters.It belongs to ADS1115 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Supply types can be categorized by Single.The supply/digital voltage of this electrical AD converter is 2V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.2, 4 inputs are employed.It operates with the minimal supply voltage of 2V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 3.3V.The maximal analog input voltage of this electrical AD converter is 4.096V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 900μW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 900μW.The conversion rate of this electrical AD converter is calculated as 860 sps.The minimal analog input voltage of this electrical AD converter is -4.096V.PGA, Selectable Address can be ensured when operating.The ADC converter consists of 1 elements.The digital converter operates with the minimal supply voltage (DC) of 2V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.It is a type of FPGA belonging to the Automotive, AEC-Q100 series.
ADS1115QDGSRQ1 Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2V
1 elements
Maximal supply voltage (DC) of 5.5V
Automotive, AEC-Q100 series
ADS1115QDGSRQ1 Applications
There are a lot of Texas Instruments ADS1115QDGSRQ1 ADC applications.
- Communication test equipment
- In-building wireless telephony
- Displaying
- Industrial Process Control
- Micro and pico cell systems, software radios
- AC motor control
- Scientific instruments
- Imaging Systems
- High Speed Data Acquisition for PCs
- Automotive
