banner_page

ADS1194CPAG

16 Bit 0.5mm Gold AFE ADS1194 3V 64-TQFP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-ADS1194CPAG
  • Package: 64-TQFP
  • Datasheet: -
  • Stock: 474
  • Description: 16 Bit 0.5mm Gold AFE ADS1194 3V 64-TQFP (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Contact Plating Gold
Package / Case 64-TQFP
Surface Mount YES
Number of Pins 64
Packaging Tray
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 64
ECCN Code EAR99
Type General Purpose
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Power (Watts) 5.7mW
Additional Feature ALSO OPERATES WITH 1.65V TO 3.6V DIGITAL SUPPLY
Max Power Dissipation 3.3mW
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.5mm
Base Part Number ADS1194
Pin Count 64
Temperature Grade COMMERCIAL
Number of Channels 8
Interface SPI
Max Supply Voltage 5.25V
Min Supply Voltage 1.65V
Nominal Supply Current 500mA
Number of Bits 16
Number of Inputs 4
Resolution 2 B
Sampling Rate 8 ksps
Voltage - Supply, Analog 2.7V~5.25V
Voltage - Supply, Digital 1.65V~3.6V
Power Consumption 3mW
Number of A/D Converters 8
Conversion Rate 8 ksps
Signal to Noise Ratio (SNR) 97 dB
Max Supply Voltage (DC) 3.6V
Min Supply Voltage (DC) 1.65V
Height 1.2mm
Length 10mm
Width 10mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

ADS1194CPAG Overview


It is packaged in the way of 64-TQFP.The electronic part in this example has been designed using 16 Bits.As part of the Tray package, it is embedded.In the 64 termination, an impedance-matching device is used for terminating a transmission line. This is referred to as the 64 termination.The supply/analog voltage of this electrical device is 2.7V~5.25V, which converts alternative voltage (AC voltage) into regulated direct voltage (DC voltage) to drive a load with regulated DC power.It is important to note that the supply/digital voltage of this electrical device is 1.65V~3.6V.In accordance with the base part number, its related parts can be identified.Supply voltage should be set to 3V.This board is designed with 64 pins.To ensure its reliability, it is designed to operate at the minimum temperature of 0°C when operating.For reliability, it operates at 70°C, its maximal operating temperature.The 64 pin count is provided.It supports the maximal supply voltage of 5.25V.A maximum voltage of 1.65V is required for its operation.This electrical device is powered by 5.7mW Watts.There is a type General Purpose electrical device here.A nominal supply current equals 500mA.In microcontrollers, there are 8 A/D converters that are used to convert analog signals like voltage into digital signals which can be read and processed by a microcontroller after they have been converted into digital form.Inputs using 4 are used.When 3.6V is at its maximum supply voltage (DC), it operates.In addition, ALSO OPERATES WITH 1.65V TO 3.6V DIGITAL SUPPLY is a characteristic of it.It operates with the minimal supply voltage (DC) of 1.65V.

ADS1194CPAG Features



ADS1194CPAG Applications


There are a lot of Texas Instruments ADS1194CPAG AFE applications.

  • Scientific instruments.
  • Medical Imaging
  • Transducer
  • Digital Multimeters, PLC's (Programming Logic Controllers)
  • Rotary encoder
  • Data Acquisition Systems
  • Spectrum Analysis
  • Digital signal processing
  • Cell Phones
  • 3-phase power control

Write a review

Note: HTML is not translated!
    Bad           Good