ADS1196CPAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Power (Watts) | 6.9mW |
| Max Power Dissipation | 4mW |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS1196 |
| Pin Count | 64 |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 8 |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 700mA |
| Number of Bits | 16 |
| Number of Inputs | 6 |
| Resolution | 2 B |
| Sampling Rate | 8 ksps |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Voltage - Supply, Digital | 1.65V~3.6V |
| Power Consumption | 3.6mW |
| Number of A/D Converters | 8 |
| Conversion Rate | 8 ksps |
| Signal to Noise Ratio (SNR) | 97 dB |
| Max Supply Voltage (DC) | 3.6V |
| Min Supply Voltage (DC) | 1.65V |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS1196CPAG Overview
In this case, it is packaged in the same way as 64-TQFP.The electronic part in this example has been designed using 16 Bits.This file is embedded in the Tray package.It involves terminating a transmission line with an impedance-matching device.The supply/analog voltage of this electrical device is 2.7V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.It is important to note that the supply/digital voltage of this electrical device is 1.65V~3.6V.The related parts of a base part number can be found by referring to the number of that base part.A 3V supply voltage should be used for the supply voltage.64 pins are used in the design of this board.To ensure its reliability, it is designed to operate at the minimum temperature of 0°C when operating.A maximum operating temperature of 70°C ensures its reliability.There is a 64 pin count that is included in this device.The maximum voltage that can be supplied by 5.25V is supported by it.It operates at a maximum voltage of 1.65V when the maximum voltage is supplied for its operation.Its power is 6.9mW Watts.Identify this electrical device by its type General Purpose.700mA is the nominal supply current that is being supplied.A 8 A/D converter is a unit that converts an analog signal like voltage to digital form so that it can be read and processed by a microcontroller, which can then be interpreted and used by other devices.The inputs are based on 6.In order to operate it, 3.6V must have a maximum supply voltage (DC).A minimal supply voltage of 12V (DC) is needed for this device to operate.
ADS1196CPAG Features
ADS1196CPAG Applications
There are a lot of Texas Instruments ADS1196CPAG AFE applications.
- High Speed Data Acquisition
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- 4-channel data acquisition
- Instrumentation and test equipment
- AC motor control
- Data Acquisition Systems
- Rotary encoder
- Imaging Systems
- Smart antenna systems
- Transducer
