ADS1294IPAG
| Parameters | |
|---|---|
| Number of Pins | 64 |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Power (Watts) | 10.1mW |
| Additional Feature | IT ALSO REQUIRES DIGITAL SUPPLY OF 1.65V TO 3.6V |
| Max Power Dissipation | 6mW |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS1294 |
| Pin Count | 64 |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 8 |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.75mA |
| Nominal Supply Current | 2.75mA |
| Number of Bits | 24 |
| Resolution | 3 B |
| Sampling Rate | 32 ksps |
| Voltage - Supply, Analog | 2.7V~5.5V |
| Voltage - Supply, Digital | 1.65V~3.6V |
| Power Consumption | 3mW |
| Number of Converters | 4 |
| Conversion Rate | 32 ksps |
| Signal to Noise Ratio (SNR) | 97 dB |
| Differential Nonlinearity | 1 LSB |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | 64-TQFP |
ADS1294IPAG Overview
In the manner of 64-TQFP, it is packaged as it is.A 24-Bit electronic part was designed for this application.This file is embedded in the Tray package.In the 64 termination, an impedance-matching device is used for terminating a transmission line. This is referred to as the 64 termination.The supply/analog voltage of this electrical device is 2.7V~5.5V, which converts alternative voltage (AC voltage) into regulated direct voltage (DC voltage) to drive a load with regulated DC power.This electrical device operates at 1.65V~3.6V volts.As a result of the base part number, it is possible to find its related parts.A 3V supply voltage should be used for the supply voltage.A set of 64 pins is included in the design.In order to maintain reliable operation, it operates at a minimal operating temperature of -40°C.A maximum operating temperature of 85°C ensures its reliability.64 pins are included.Ensures that 5.25V is supplied with its maximum supply voltage.1.65V is the maximum voltage that can be supplied to the device in order for it to operate.There is a mounting on the Surface Mount-axis side of it.This electrical device has a power rating of 10.1mW Watts.As the supply current for this DC switching regulator is 2.75mA, it operates from this current.Identify this electrical device by its type General Purpose.It is possible to convert numbers to words as well as figures to words by using 4 converters.Nominal supply current is 2.75mA.IT ALSO REQUIRES DIGITAL SUPPLY OF 1.65V TO 3.6V plays an important role in characterizing it as well.
ADS1294IPAG Features
ADS1294IPAG Applications
There are a lot of Texas Instruments ADS1294IPAG AFE applications.
- Scientific instruments
- Medical Imaging
- Broadband data applications
- Digital beam-forming systems for ultrasound
- Handheld Terminal Interface
- Communication Systems
- TD-SCDMA, WiMAX
- 4-channel data acquisition
- Automotive
- 3-phase power control
