ADS130E08IPAG
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Packaging | Tube |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Type | General Purpose |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 6.6mW |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS130E08 |
| Polarity | Bipolar |
| Temperature Grade | INDUSTRIAL |
| Interface | SPI |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 2.2mA |
| Power Dissipation | 6.6W |
| Number of Bits | 16 |
| Resolution | 2 B |
| Sampling Rate | 8 ksps |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Voltage - Supply, Digital | 1.7V~3.6V |
| Number of Analog In Channels | 8 |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Power Consumption | 6mW |
| Number of Converters | 8 |
| Conversion Rate | 8 ksps |
| Analog Input Voltage-Max | 2.4V |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 89 dB |
| Max Supply Voltage (DC) | 3.6V |
| Min Supply Voltage (DC) | 1.7V |
| Analog Input Voltage-Min | -2.4V |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ADS130E08IPAG Overview
In the manner of 64-TQFP, it is packaged as it is.16 Bits were used in the design of this electronic part.This file is embedded in the Tube package.In 64 terminations, the transmission line is terminated with a device that matches its characteristic impedance.Using 2.7V~5.25V, this electrical device converts alternative voltage (AC voltage) into regulated direct voltage (DC voltage) and provides regulated DC power to drive a load.This electrical device has a voltage of 1.7V~3.6V for its supply/digital input.Using the base part number of a component, its related parts can be found based on that number.The supply voltage should be kept as 3V.64 pins are used in the design of this board.It operates with the minimal operating temperature of -40°C to ensure its reliability.As a matter of reliability, it is designed to operate at the maximal operating temperature of 105°C.In addition to that, it supports the maximum voltage of the 3.6V supply.During its operation, it is supplied with a maximum voltage of 1.8V.The DC switching regulator of this design operates with a supply current of 2.2mA.The type of this electrical device is General Purpose.There are 8 converters, which will convert numbers to words and figures to words. It operates at the maximum voltage (DC) it can handle.During operation, it operates with the minimal supply voltage (DC) of 1.7V.A/D converters have a number of channels known as 8 channels.
ADS130E08IPAG Features
ADS130E08IPAG Applications
There are a lot of Texas Instruments ADS130E08IPAG AFE applications.
- Medical Instrumentation and medical imaging
- Multiplexed Data Acquisition Systems
- RADAR processing, digital oscilloscopes
- Wireless and wired broadband communications
- Medical Imaging
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Rotary encoder
- Uninterrupted Power Supplies
- Handheld Terminal Interface
- CMOS Image sensors for mobile applications
