ADS130E08IPAGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Packaging | Cut Tape (CT) |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 6.6mW |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS130E08 |
| Operating Supply Voltage | 3V |
| Number of Elements | 8 |
| Polarity | Bipolar |
| Temperature Grade | INDUSTRIAL |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 2.2mA |
| Power Dissipation | 6.6W |
| Number of Bits | 16 |
| Resolution | 2 B |
| Sampling Rate | 8 ksps |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Voltage - Supply, Digital | 1.7V~3.6V |
| Number of Analog In Channels | 8 |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Power Consumption | 6mW |
| Analog Input Voltage-Max | 2.4V |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 89 dB |
| Max Supply Voltage (DC) | 3.6V |
| Min Supply Voltage (DC) | 1.7V |
| Analog Input Voltage-Min | -2.4V |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS130E08IPAGR Overview
64-TQFP is the way it is packaged.16 Bits were used to design this electronic part.It is part of the Cut Tape (CT) package, which is included in the download.It is a method of terminating a transmission line with an impedance-matching device that is known as 64 termination.This electrical device supplies/analog voltage 2.7V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage), providing regulated DC power to drive devices.This electrical device takes the form of a digital voltage supply, which is 1.7V~3.6V.The base part number identifies its related parts.Supply voltage should be set to 3V.As you can see, it is designed with 64 pins.Ensure its reliability by operating at -40°C°C minimum operating temperature.As a result, it is operating at a temperature which is maximal for its reliability, which is 105°C.It is capable of supporting the maximum possible voltage supply for 5.25V.A maximum voltage of 1.7V is required for its operation.A high-efficiency supply voltage is 3V.DC switching regulator operating at 2.2mA supply current.The type of this electrical device is General Purpose.As long as 3.6V is set to a maximum supply voltage (DC), it operates as designed.1.7V is the minimum supply voltage (DC) that it operates on.8 channels exist in the A/D converter.
ADS130E08IPAGR Features
ADS130E08IPAGR Applications
There are a lot of Texas Instruments ADS130E08IPAGR AFE applications.
- Scientific instruments
- Audio/Video devices
- Data Acquisition Systems
- Automotive
- Displaying
- 3-phase power control
- Digital Storage Oscilloscope
- Imaging Systems
- RADAR processing, digital oscilloscopes
- Rotary encoder
