ADS131E04IPAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 360.605934mg |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Type | General Purpose |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 10.2mW |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS131E04 |
| Polarity | Bipolar |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4 |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 5.8mA |
| Number of Bits | 16, 24 |
| Number of Inputs | 4 |
| Resolution | 2 B |
| Sampling Rate | 64 ksps |
| Voltage - Supply, Analog | 2.7V~5.25V |
| Voltage - Supply, Digital | 1.8V~3.6V |
| Power Consumption | 6mW |
| Number of A/D Converters | 6 |
| Signal to Noise Ratio (SNR) | 107 dB |
| Max Supply Voltage (DC) | 3.6V |
| Min Supply Voltage (DC) | 1.8V |
| Height | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS131E04IPAG Overview
In the way of 64-TQFP, it is packaged.In order to design this electronic part, 16, 24 Bits have been used.There is an embedded version of it in the Tube package.64 termination is a method of terminating transmission lines with impedance matching devices.This electrical device provides regulated DC power to run a load based on the supply voltage (analog voltage) 2.7V~5.25V, converted from AC voltage to DC voltage.Electrical device 1.8V~3.6V has a 1.8V~3.6V supply voltage/digital voltage.The base part number identifies its related parts.As long as the supply voltage is kept at 3V, it is fine.64 pins are used in the design.In order to ensure its reliability, it operates at the minimal operating temperature of -40°C.The maximum operating temperature of the device is set at 105°C to ensure its reliability at all times.The maximum voltage that can be supplied by 5.25V is supported by it.This device reaches its maximum operating voltage when it is supplied with a voltage of 1.8V.In order to operate this DC switching regulator, the supply current must be in the range of 5.8mA.The type of this electrical device is General Purpose.6 A/D converters convert analog signals, like voltage, to digital form so that microcontrollers can read and process them.Inputs using 4 are used.In order to operate it, 3.6V must have a maximum supply voltage (DC).Using 1.8V's minimal supply voltage (DC), it operates.
ADS131E04IPAG Features
ADS131E04IPAG Applications
There are a lot of Texas Instruments ADS131E04IPAG AFE applications.
- Digital beam-forming systems for ultrasound
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Wireless local loop
- Handheld Terminal Interface
- High Speed Data Acquisition for PCs
- Microcontrollers.
- Multicarrier, multimode digital receivers
- Instrumentation and test equipment
- Micro and pico cell systems, software radios
- Smart antenna systems
