ADS4242IRGCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Simultaneous Sampling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.C.3 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 211mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS4242 |
| Pin Count | 64 |
| Operating Supply Voltage | 1.8V |
| Configuration | S/H-ADC |
| Number of Channels | 2 |
| Interface | DDR, LVDS, Parallel |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Nominal Supply Current | 73mA |
| Power Dissipation | 173mW |
| Number of Bits | 14 |
| Input Type | Differential |
| Architecture | Pipelined |
| Converter Type | ADC, FLASH METHOD |
| Supply Type | Analog, Digital, Single |
| Reference Type | Internal |
| Data Interface | LVDS - Parallel, Parallel |
| Resolution | 1.75 B |
| Sampling Rate | 65 Msps |
| Voltage - Supply, Analog | 1.7V~1.9V |
| Voltage - Supply, Digital | 1.7V~1.9V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 65M |
| Power Consumption | 183mW |
| Linearity Error-Max (EL) | 0.03% |
| Integral Nonlinearity (INL) | 5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 65 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 2V |
| Output Format | PARALLEL, WORD |
| Signal to Noise Ratio (SNR) | 73.6 dB |
| Max Supply Voltage (DC) | 1.9V |
| Min Supply Voltage (DC) | 1.7V |
| Spurious-free dynamic range (SFDR) | 91 dB |
| Height | 1mm |
| Length | 9mm |
| Width | 9mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS4242IRGCT Overview
The analogue to digital converter is designed with 14 Bits.The AD converter is embedded in the 64-VFQFN Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 64 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.8V.The A/D converter has 2 channels.The is equipped with 64 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, FLASH METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 65M Hz.The input type of this electronic AD converter is Differential.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 64 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.7V~1.9V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.75 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS4242 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.A supply type can be classified by a Analog, Digital, Single number.The supply/digital voltage of this electrical AD converter is 1.7V~1.9V.The ADC converter operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.7V.The output formats of this electrical AD converter are PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 1.8V.The maximal analog input voltage of this electrical AD converter is 2V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 173mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 211mW.The number of channels is growing strong/weak: 2.The conversion rate of this electrical AD converter is calculated as 65 Msps.Simultaneous Sampling can be ensured when operating.The digital converter operates with the minimal supply voltage (DC) of 1.7V.The ADC converter operates with the maximal supply voltage (DC) of 1.9V.
ADS4242IRGCT Features
1 Functions
64 basic kinds of terminations
64 pin count
Minimal supply voltage of 1.7V
Maximal supply voltage (DC) of 1.9V
ADS4242IRGCT Applications
There are a lot of Texas Instruments ADS4242IRGCT ADC applications.
- 3-phase power control
- Music reproduction technology
- Automotive
- Rotary encoder
- Transducer
- Telecommunications
- High Speed Data Acquisition
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Communication Systems
- Handheld Terminal Interface
