ADS5294IPFPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Simultaneous Sampling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.C.3 |
| Subcategory | Analog to Digital Converters |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADS5294 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Configuration | S/H-ADC |
| Number of Channels | 8 |
| Interface | LVDS, Serial |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Number of Bits | 14 |
| Input Type | Differential |
| Architecture | Pipelined |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | LVDS - Serial |
| Resolution | 1.75 B |
| Sampling Rate | 80 Msps |
| Voltage - Supply, Analog | 1.7V~1.9V |
| Voltage - Supply, Digital | 1.7V~1.9V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 80M |
| Output Bit Code | OFFSET BINARY, 2'S COMPLEMENT BINARY |
| Power Consumption | 464mW |
| Linearity Error-Max (EL) | 0.0336% |
| Integral Nonlinearity (INL) | 5.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 80 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 2V |
| Signal to Noise Ratio (SNR) | 75.5 dB |
| Max Supply Voltage (DC) | 1.9V |
| Min Supply Voltage (DC) | 1.7V |
| Analog Input Voltage-Min | -2V |
| Spurious-free dynamic range (SFDR) | 84 dB |
| Height | 1.2mm |
| Length | 12mm |
| Width | 12mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS5294IPFPT Overview
The analogue to digital converter is designed with 14 Bits.The AD converter is embedded in the 80-TQFP Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 80 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 1.8V.The A/D converter has 8 channels.The is equipped with 80 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 80M Hz.The input type of this electronic AD converter is Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 80 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.7V~1.9V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.75 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS5294 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Analog, Digital describes the type of supply.The supply/digital voltage of this electrical AD converter is 1.7V~1.9V.The ADC converter operates with the maximal supply voltage of 1.9V.It operates with the minimal supply voltage of 1.7V.This electrical digital converter operates from a supply voltage of 1.8V.The maximal analog input voltage of this electrical AD converter is 2V.The number of channels is growing strong/weak: 8.The conversion rate of this electrical AD converter is calculated as 80 Msps.The minimal analog input voltage of this electrical AD converter is -2V.Simultaneous Sampling can be ensured when operating.The digital converter operates with the minimal supply voltage (DC) of 1.7V.The ADC converter operates with the maximal supply voltage (DC) of 1.9V.
ADS5294IPFPT Features
1 Functions
80 basic kinds of terminations
80 pin count
Minimal supply voltage of 1.7V
Maximal supply voltage (DC) of 1.9V
ADS5294IPFPT Applications
There are a lot of Texas Instruments ADS5294IPFPT ADC applications.
- Handheld Terminal Interface
- Automotive
- In-building wireless telephony
- Medical Instrumentation and medical imaging
- 4-channel data acquisition
- Imaging Systems
- Industrial Process Control
- Battery Operated Systems
- Cell Phones
- Microcontrollers.
