ADS6145IRHBT
| Parameters | |
|---|---|
| Linearity Error-Max (EL) | 0.0275% |
| Integral Nonlinearity (INL) | 4.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Conversion Rate | 125 Msps |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 2V |
| Output Format | PARALLEL, WORD |
| Signal to Noise Ratio (SNR) | 74.5 dB |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 625mW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADS6145 |
| Pin Count | 32 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Bipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Interface | DDR, LVDS, Parallel |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 123mA |
| Power Dissipation | 625mW |
| Number of Bits | 14 |
| Input Type | Differential |
| Architecture | Pipelined |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Analog, Digital, Single |
| Reference Type | External, Internal |
| Data Interface | LVDS - Parallel, Parallel |
| Resolution | 1.75 B |
| Sampling Rate | 125 Msps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 1.65V~3.6V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 125M |
| Output Bit Code | BINARY, OFFSET BINARY, 2'S COMPLEMENT BINARY |
| Power Consumption | 417mW |
ADS6145IRHBT Overview
The analogue to digital converter is designed with 14 Bits.The AD converter is embedded in the 32-VFQFN Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 32 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 1 channels.The is equipped with 32 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 125M Hz.The input type of this electronic AD converter is Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 32 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 3V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.75 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS6145 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Depending on the supply type, analogue to digital converters can be categorized by Analog, Digital, Single.The supply/digital voltage of this electrical AD converter is 1.65V~3.6V.Surface Mount allows the ADC converter to be mounted.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 3V.The output formats of this electrical AD converter are PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 3.3V.The maximal analog input voltage of this electrical AD converter is 2V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 625mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 625mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 125 Msps.
ADS6145IRHBT Features
1 Functions
32 basic kinds of terminations
32 pin count
Minimal supply voltage of 3V
ADS6145IRHBT Applications
There are a lot of Texas Instruments ADS6145IRHBT ADC applications.
- Data Acquisition Systems
- Imaging Systems
- Battery Operated Systems
- Multicarrier, multimode digital receivers
- Digital beam-forming systems for ultrasound
- High Speed Data Acquisition for PCs
- Communications
- Rotary encoder
- In-building wireless telephony
- Smart antenna systems
