ADS7041IRUGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold, Silver |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFQFN |
| Number of Pins | 8 |
| Weight | 5.896701mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 600μW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS7041 |
| Polarity | Unipolar |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Number of Bits | 10 |
| Supply Current-Max | 0.2mA |
| Input Type | Single Ended |
| Architecture | SAR |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital |
| Reference Type | Supply |
| Data Interface | SPI |
| Resolution | 1.25 B |
| Sampling Rate | 1 Msps |
| Voltage - Supply, Analog | 1.65V~3.6V |
| Voltage - Supply, Digital | 1.65V~3.6V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 1M |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 0.8 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 61 dB |
| Differential Nonlinearity | 0.7 LSB |
| Height | 400μm |
| Length | 1.5mm |
| Width | 1.5mm |
| Thickness | 370μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADS7041IRUGR Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 8-XFQFN package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 8 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 1M Hz.The input type of this electronic AD converter is Single Ended.There are Supply reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 1.65V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to ADS7041 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Analog, Digital describes the type of supply.The supply/digital voltage of this electrical AD converter is 1.65V~3.6V.Surface Mount allows the ADC converter to be mounted.The ADC converter operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 1.65V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 600μW.The number of channels is growing strong/weak: 1.The maximal supply current amounts to 0.2mA.
ADS7041IRUGR Features
1 Functions
8 basic kinds of terminations
Minimal supply voltage of 1.65V
ADS7041IRUGR Applications
There are a lot of Texas Instruments ADS7041IRUGR ADC applications.
- RADAR processing, digital oscilloscopes
- High Speed Data Acquisition
- In-building wireless telephony
- Medical Imaging
- Scientific instruments.
- Transducer
- Handheld Terminal Interface
- Digital Multimeters, PLC's (Programming Logic Controllers)
- CMOS Image sensors for mobile applications
- Communication test equipment
