ADS7253IRTET
| Parameters | |
|---|---|
| Number of Elements | 2 |
| Polarity | Bipolar, Unipolar |
| Configuration | S/H-ADC |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Power Dissipation | 42.5mW |
| Number of Bits | 12 |
| Supply Current-Max | 10mA |
| Input Type | Pseudo-Differential, Single Ended |
| Architecture | SAR |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 1.5 B |
| Sampling Rate | 1 Msps |
| Voltage - Supply, Analog | 5V |
| Voltage - Supply, Digital | 1.65V~5.5V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 1M |
| Power Consumption | 45mW |
| Integral Nonlinearity (INL) | 1 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL |
| Signal to Noise Ratio (SNR) | 73.5 dB |
| Conversion Time-Max | 0.45μs |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Simultaneous Sampling |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 50mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADS7253 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
ADS7253IRTET Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 16-WFQFN Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 1M Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS7253 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Analog, Digital.The supply/digital voltage of this electrical AD converter is 1.65V~5.5V.Surface Mount can be used to mount the analogue to digital converter.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 4.5V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 42.5mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 50mW.Simultaneous Sampling can be ensured when operating.The ADC converter consists of 2 elements.The maximal supply current amounts to 10mA.
ADS7253IRTET Features
1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 4.5V
2 elements
ADS7253IRTET Applications
There are a lot of Texas Instruments ADS7253IRTET ADC applications.
- 3-phase power control
- In-building wireless telephony
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Wireless local loop
- AC motor control
- Digital beam-forming systems for ultrasound
- Broadband data applications
- Communication Systems
- Imaging Systems
- Audio/Video devices
