ADS7830IPWTG4
| Parameters | |
|---|---|
| Signal to Noise Ratio (SNR) | 50 dB |
| Max Supply Voltage (DC) | 5.25V |
| Differential Nonlinearity | 0.5 LSB |
| Min Supply Voltage (DC) | 2.7V |
| Spurious-free dynamic range (SFDR) | 68 dB |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 5mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | ADS7830 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Configuration | MUX-S/H-ADC |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 750μA |
| Power Dissipation | 3.75mW |
| Number of Bits | 8 |
| Input Type | Differential, Single Ended |
| Architecture | SAR |
| Number of Inputs | 4, 8 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | I2C |
| Resolution | 1 B |
| Sampling Rate | 70 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V 5V |
| Voltage - Supply, Digital | 2.7V~3.6V 5V |
| Number of Analog In Channels | 8 |
| Sampling Rate (Per Second) | 70k |
| Output Bit Code | BINARY |
| Integral Nonlinearity (INL) | 0.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Number of Converters | 1 |
| Conversion Rate | 70 ksps |
| Ratio - S/H:ADC | 1:1 |
| Output Format | SERIAL |
ADS7830IPWTG4 Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 16-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 2.7V.The A/D converter has 8 channels.The is equipped with 16 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 70k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS7830 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Depending on the supply type, analogue to digital converters can be categorized by Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V 5V.The ADC converter operates with the maximal supply voltage of 5.25V.4, 8 inputs are employed.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 3.75mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 5mW.The conversion rate of this electrical AD converter is calculated as 70 ksps.There are 1 converters, which will convert numbers to words and figures to words. The digital converter operates with the minimal supply voltage (DC) of 2.7V.The ADC converter operates with the maximal supply voltage (DC) of 5.25V.
ADS7830IPWTG4 Features
1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 2.7V
Maximal supply voltage (DC) of 5.25V
ADS7830IPWTG4 Applications
There are a lot of Texas Instruments ADS7830IPWTG4 ADC applications.
- Digital Multimeters, PLC's (Programming Logic Controllers)
- Scientific instruments
- In-building wireless telephony
- Microcontrollers.
- Scientific instruments.
- Data Acquisition Systems
- Audio/Video devices
- Battery Operated Systems
- TD-SCDMA, WiMAX
- Communication Systems
