ADS8318IDRCT

16 Bit 0.5mm Gold ADC microPOWER? Series ADS8318 5V 10-VFDFN Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-ADS8318IDRCT
Package: 10-VFDFN Exposed Pad
Datasheet: PDF
Stock: 703
Description: 16 Bit 0.5mm Gold ADC microPOWER? Series ADS8318 5V 10-VFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-VFDFN Exposed Pad
Number of Pins	10
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	microPOWER™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	10
ECCN Code	EAR99
Subcategory	Analog to Digital Converters
Max Power Dissipation	22.5mW
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADS8318
Pin Count	10
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Polarity	Bipolar
Configuration	S/H-ADC
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Nominal Supply Current	3.6mA
Power Dissipation	22.5mW
Number of Bits	16
Input Type	Differential
Architecture	SAR
Converter Type	ADC, SUCCESSIVE APPROXIMATION
Supply Type	Analog, Digital, Single
Reference Type	External
Data Interface	SPI
Resolution	2 B
Sampling Rate	500 ksps
Voltage - Supply, Analog	5V
Voltage - Supply, Digital	2.375V~5.5V
Number of Analog In Channels	1
Sampling Rate (Per Second)	500k
Output Bit Code	BINARY
Power Consumption	18mW
Linearity Error-Max (EL)	0.0023%
Integral Nonlinearity (INL)	1.5 LSB
Sample and Hold / Track and Hold	SAMPLE
Conversion Rate	500 ksps
Ratio - S/H:ADC	1:1
Analog Input Voltage-Max	5.6V
Output Format	SERIAL
Signal to Noise Ratio (SNR)	96 dB
Differential Nonlinearity	1 LSB
Analog Input Voltage-Min	-2.048V
Height	1mm
Length	3mm
Width	3mm
Thickness	900μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

ADS8318IDRCT Overview

The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 10-VFDFN Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 500k Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS8318 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.It is possible to categorize the supply type according to Analog, Digital, Single.The supply/digital voltage of this electrical AD converter is 2.375V~5.5V.There is a possibility of mounting the analogue to digital converter by using the Surface Mount axis.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 4.5V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 5.6V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 22.5mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 22.5mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 500 ksps.The minimal analog input voltage of this electrical AD converter is -2.048V.It is a type of FPGA belonging to the microPOWER? series.