ADS900E
| Parameters | |
|---|---|
| Number of Bits | 10 |
| Input Type | Differential, Single Ended |
| Architecture | Pipelined |
| Converter Type | ADC, PROPRIETARY METHOD |
| Supply Type | Single |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Resolution | 1.25 B |
| Sampling Rate | 20 Msps |
| Voltage - Supply, Analog | 2.7V~3.7V |
| Voltage - Supply, Digital | 2.7V~3.7V |
| Number of Analog In Channels | 1 |
| Sampling Rate (Per Second) | 20M |
| Output Bit Code | OFFSET BINARY |
| Power Consumption | 54mW |
| Integral Nonlinearity (INL) | 3.5 LSB |
| Sample and Hold / Track and Hold | TRACK |
| Conversion Rate | 20 Msps |
| Ratio - S/H:ADC | 1:1 |
| Signal to Noise Ratio (SNR) | 49 dB |
| Max Supply Voltage (DC) | 3.7V |
| Differential Nonlinearity | 1 LSB |
| Min Supply Voltage (DC) | 2.7V |
| Spurious-free dynamic range (SFDR) | 53 dB |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | SpeedPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 66mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | ADS900 |
| Pin Count | 28 |
| Operating Supply Voltage | 3V |
| Polarity | Unipolar |
| Power Supplies | 3V |
| Configuration | S/H-ADC |
| Number of Channels | 1 |
| Max Supply Voltage | 3.7V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 18mA |
| Power Dissipation | 66mW |
ADS900E Overview
The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 28-SSOP (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 28 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 1 channels.The is equipped with 28 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, PROPRIETARY METHOD converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 20M Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is Pipelined.There are 28 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.7V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to ADS900 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Depending on the supply type, analogue to digital converters can be categorized by Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.7V.The ADC converter operates with the maximal supply voltage of 3.7V.It operates with the minimal supply voltage of 2.7V.This electrical digital converter operates from a supply voltage of 3V.The ADC converter operates from 3V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 66mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 66mW.The number of channels is growing strong/weak: 1.The conversion rate of this electrical AD converter is calculated as 20 Msps.The digital converter operates with the minimal supply voltage (DC) of 2.7V.The ADC converter operates with the maximal supply voltage (DC) of 3.7V.It is a type of FPGA belonging to the SpeedPlus? series.
ADS900E Features
1 Functions
28 basic kinds of terminations
28 pin count
Minimal supply voltage of 2.7V
3V power supplies
Maximal supply voltage (DC) of 3.7V
SpeedPlus? series
ADS900E Applications
There are a lot of Texas Instruments ADS900E ADC applications.
- High Speed Data Acquisition
- Spectrum Analysis
- Smart antenna systems
- Scientific instruments
- Battery Operated Systems
- Audio/Video devices
- Music recording
- AC motor control
- Music reproduction technology
- Scientific instruments.
