ADSP-21061KS-160
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | QFP |
| Number of Pins | 240 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Interface | SSP, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 128kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 850mA |
| Bit Size | 32 |
| Frequency (Max) | 40MHz |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Address Bus Width | 32 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Format | FLOATING POINT |
| Integrated Cache | NO |
| RAM (words) | 32000 |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 32 |
| Number of DMA Channels | 6 |
| Length | 32mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ADSP-21061KS-160 Overview
This is an electronic component with a QFP package.A packaging way of Bulk is provided.In order to use it, it has 240 terminations.It is supplied with voltage by 5V.240 component pins are present.An overview of its configuration can be found in the section on 240 pins.The device operates at the frequency of 40MHz in accordance with a specific design.A Surface Mount mounting method is used for its mounting.According to its specific characteristics, this device is classified in the subcategory Digital Signal Processors.The minimum voltage supplied to this device is as low as 4.75V.Devices like this can be powered by voltages up to 5.25V.5V is the supply voltage for this device.Electricity is supplied by 5V.The uPs/uCs/peripheral ICs of the device employ the DIGITAL SIGNAL PROCESSOR, OTHER type.External events are tracked and measured with 1 timers/counters.This processor core adopts the architecture of SHARC.Operating temperatures should be lower than 85°C.The operating temperature should be in excess of 0°C.An external source causes 3 interrupts.Its frequency should remain below 40MHz.6 DMA channels transfer data without overloading the CPU.Data is communicated between devices using 2 serial I/Os.
ADSP-21061KS-160 Features
Supplied in the QFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
1 timers/counters
3 external interrupts
ADSP-21061KS-160 Applications
There are a lot of Analog Devices, Inc. ADSP-21061KS-160 DSP applications.
- Infrared
- Fourier transform
- Dam design
- Geophysical processing
- Digital image processing, data compression
- Digital communications
- MP3 audio player
- Medical imaging
- Streaming music
- Speech processing and recognition
