ADSP-21062KS-133
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 240-BFQFP Exposed Pad |
| Number of Pins | 240 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 5 (48 Hours) |
| Number of Terminations | 240 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21062 |
| Pin Count | 240 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Host Interface, Link Port, Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 256kB |
| Supply Current-Max | 850mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Address Bus Width | 32 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 2000000 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 1 |
| Non-Volatile Memory | External |
| Number of DMA Channels | 10 |
| Length | 32mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADSP-21062KS-133 Overview
This is an electronic component with a 240-BFQFP Exposed Pad package.Packaging way Tray is provided.Its Floating Point status makes it ideal for a wide range of applications.It is mounted in the way of Surface Mount.If it is operating at the temperature of 0°C~85°C TC, then it will be operating normally.This refers to the analog voltage range that can be input or output from 5.00V.There are several digital signal processors in the SHARC? series, including this one.The terminations for its uses are 240.5V provides the supply voltage for it.Pins are available on the 240 component.In its configuration, it contains 240 pins.Many related parts can be identified by using the ADSP-21062 part number as a base.In order for the device to operate at 33MHz frequency, there is a specific design.The mounting method of the device is Surface Mount.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.In order to power this device, a voltage as low as 4.75V needs to be supplied.This device can handle a maximum voltage of 5.25V.This device is powered by 5V's supply voltage.Electricity is supplied by 5V.1 timers/counters are used to measure time and count external events.Processor core SHARC adopts the SHARC architecture.Interrupts caused by an external source cause 3 interrupts.For data transfer, 10 DMA channels are available without overloading the CPU.For data communication between devices, 2 serial I/Os are used.
ADSP-21062KS-133 Features
Supplied in the 240-BFQFP Exposed Pad package
Operating supply voltage of 5V
1 timers/counters
3 external interrupts
ADSP-21062KS-133 Applications
There are a lot of Analog Devices Inc. ADSP-21062KS-133 DSP applications.
- Audio
- Biometrics
- Tomography technology
- Smart camera
- Monitoring equipment
- Audio signal
- Voice recognition
- MP3 audio player
- Other sensor array processing
- Financial signals
