ADSP-21062KS-160
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 240-BFQFP Exposed Pad |
| Number of Pins | 240 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 240 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21062 |
| Pin Count | 240 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Host Interface, Link Port, Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 256kB |
| Number of Bits | 32 |
| Supply Current-Max | 850mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Address Bus Width | 32 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 2000000 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 1 |
| Non-Volatile Memory | External |
| Number of DMA Channels | 10 |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADSP-21062KS-160 Overview
It is a type of electronic component available in package 240-BFQFP Exposed Pad.A packaging way of Tray is provided.The fact that it belongs to the Floating Point family means that it can be applied to a wide range of applications.There is a mounting point for it along the direction of Surface Mount.By operating the device at the temperature of 0°C~85°C TC, a normal operation is ensured.Voltages can be input or output within 5.00V's analog voltage range.The SHARC? series includes this digital signal processor.The terminations for its uses are 240.Using 5V as the supply voltage, it operates.Pins are available for 240 components.There are 240 pins in its configuration.There are a number of related parts that can be identified using the base part number ADSP-21062.The device operates at the frequency of 40MHz in accordance with a specific design.Mounting is accomplished using Surface Mount.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.This device requires a minimum voltage of 4.75V.There is a maximum voltage supply of 5.25V to this device.5V is the supply voltage for this device.5V electric power supplies the facility.To measure time and count events externally, 1 timers/counters are used.SHARC architecture is used for this processor core.The external source of 3 interrupts is causing 3 interrupts.There are 32 information stored in the device.10 DMA channels transfer data without overloading the CPU.Data is transferred between devices using serial 2 I/Os.
ADSP-21062KS-160 Features
Supplied in the 240-BFQFP Exposed Pad package
Operating supply voltage of 5V
1 timers/counters
3 external interrupts
ADSP-21062KS-160 Applications
There are a lot of Analog Devices Inc. ADSP-21062KS-160 DSP applications.
- Consumer electronic gadgets
- Automobiles
- Encoding/broadcast
- Smart phones
- Computers and laptop
- Sonar
- Control systems
- Scene analysis technology
- Dam design
- Smart camera
