ADSP-21062LAB-160
| Parameters | |
|---|---|
| Contact Plating | Lead, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 225-BBGA |
| Number of Pins | 225 |
| Operating Temperature | -40°C~85°C TC |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 225 |
| Type | Floating Point |
| Terminal Finish | Tin/Lead/Silver (Sn62Pb36Ag2) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21062 |
| Pin Count | 225 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | Host Interface, Link Port, Serial Port |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| RAM Size | 256kB |
| Supply Current-Max | 600mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Address Bus Width | 32 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| RAM (words) | 65536 |
| Voltage - I/O | 3.30V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Height Seated (Max) | 2.7mm |
| Length | 23mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADSP-21062LAB-160 Overview
It is a kind of electronic component available in the 225-BBGA package.The packaging way is Tray.Floating Point's wide range of applications makes it ideal for a wide variety of applications.In order to mount it, it must be in the direction of Surface Mount.It is recommended that the device operate at a temperature of -40°C~85°C TC to ensure its normal operation.In analog circuits, the analog voltage range 3.30V represents the voltage range that is available for input or output.The SHARC? series includes this digital signal processor.The terminations for its uses are 225.3.3V provides the supply voltage for it.In this component, there are pins for 225.The configuration of this board includes 225 pins.By using its base part number of ADSP-21062, many related parts can be identified.The device operates at the frequency of 40MHz in accordance with a specific design.As a mounting method, it uses Surface Mount.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.In this device, the minimum voltage is 3.15V.A maximum voltage of 3.45V can be provided to this device.A voltage of 3.3V is used as the supply voltage.Time and external events are measured and counted with 1 timers/counters.An architecture of SHARC is adopted by this processor core.
ADSP-21062LAB-160 Features
Supplied in the 225-BBGA package
Operating supply voltage of 3.3V
1 timers/counters
ADSP-21062LAB-160 Applications
There are a lot of Analog Devices Inc. ADSP-21062LAB-160 DSP applications.
- Digital hardware
- Radio detection and rangin systems
- Automobile electronic gadgets
- Remote sensing image processing technology
- Processing system
- Statistical signal processing
- Infinite impulse response filters
- Audio
- Seismology
- Boats
