ADSP-21062LKS-160
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 240-BFQFP Exposed Pad |
| Number of Pins | 240 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 240 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21062 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | Host Interface, Link Port, Serial Port |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| RAM Size | 256kB |
| Number of Bits | 32 |
| Supply Current-Max | 530mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Address Bus Width | 32 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 2000000 |
| Voltage - I/O | 3.30V |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 1 |
| Non-Volatile Memory | External |
| Number of DMA Channels | 10 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADSP-21062LKS-160 Overview
It is a kind of electronic component that comes in a package of 240-BFQFP Exposed Pad.There is a packaging method of Tray provided with it.Floating Point's wide range of applications makes it ideal for a wide variety of applications.Surface Mount is the direction in which it is mounted.If it is operating at the temperature of 0°C~85°C TC, then it will be operating normally.As the name implies, the analog voltage range of 3.30V refers to the voltage that can be inserted or removed.It is a part of the SHARC? series of digital signal processors.The use of it is terminated by 240.A voltage of 3.3V is used as the supply voltage.In this component, there are pins for 240.This configuration contains 240 pins.With its base part number of ADSP-21062, many related parts can be identified.The device operates at the frequency of 40MHz in accordance with a specific design.Mounting is accomplished using Surface Mount.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.It is possible to supply as low a voltage as 3.15V to this device.3.45V is the maximum voltage that can be supplied to this device.A supply voltage of 3.3V is required for its operation.Counting external events and measuring time are done by 1 timers/counters.The architecture of this processor core is SHARC.An external source causes 3 interrupts.The device stores 32 pieces of information.For data transfer, 10 DMA channels are available without overloading the CPU.Data is transferred between devices using serial 2 I/Os.
ADSP-21062LKS-160 Features
Supplied in the 240-BFQFP Exposed Pad package
Operating supply voltage of 3.3V
1 timers/counters
3 external interrupts
ADSP-21062LKS-160 Applications
There are a lot of Analog Devices Inc. ADSP-21062LKS-160 DSP applications.
- Tomography technology
- Speech signal processing
- Digital communications
- Geoscience signal processing
- House construction
- Automobile electronic gadgets
- Vibration signal processing
- Digital hardware
- Seismology
- Encoding/broadcast
