ADSP-21375BSWZ-2B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-LQFP Exposed Pad |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 208 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21375 |
| Pin Count | 208 |
| Operating Supply Voltage | 1.26V |
| Interface | DAI, DPI |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 256kB |
| Number of I/O | 16 |
| RAM Size | 64kB |
| Memory Type | PROM, SRAM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (256kB) |
| Voltage - Core | 1.20V |
| Height | 1.4mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21375BSWZ-2B Overview
It is a type of electronic component available in package 208-LQFP Exposed Pad.Packaging way Tray is provided.With its association with Floating Point, it is suitable for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.As long as it is operated at the temperature of -40°C~85°C TA, it will operate normally.As the name implies, the analog voltage range of 3.30V refers to the voltage that can be inserted or removed.As part of the SHARC? series, this digital signal processor is included.Its uses have 208 terminations.It works with a voltage of 1.2V as a supply voltage.The 208 component has pins.There are 208 pins in its configuration.The base part number ADSP-21375 can be used to identify many associated parts.The device is specifically designed to operate at the frequency of 266MHz.The mounting method of the device is Surface Mount.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.1.14V is the minimum voltage that can be supplied to this device.3.47V is the maximum voltage that can be supplied to this device.Using 1.26V as the supply voltage, it operates.Its memory is capable of storing 256kB data.Data formats and transmission speeds are configurable for 1 UART channels used for asynchronous serial communication.Count, measure, and measure external events using 2 timers/counters.SHARC architecture is used for this processor core.It is equipped with 16 I/Os.PROM, SRAM is the type of memory it uses.
ADSP-21375BSWZ-2B Features
Supplied in the 208-LQFP Exposed Pad package
Operating supply voltage of 1.26V
2 timers/counters
16 I/Os
ADSP-21375BSWZ-2B Applications
There are a lot of Analog Devices Inc. ADSP-21375BSWZ-2B DSP applications.
- Seismology
- Biomedical treatment
- MP3 audio player
- Processing system
- TVs
- Statistical signal processing
- Radio detection and rangin systems
- Tomography technology
- Speech signal processing
- Remote sensing image processing technology
