ADSP-21477BCPZ-1A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 88-VFQFN Exposed Pad, CSP |
| Number of Pins | 88 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 88 |
| Type | Floating Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21477 |
| Pin Count | 88 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 2MB |
| Number of I/O | 16 |
| RAM Size | 32kB |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 24 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| RAM (words) | 65536 |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 2Mbit |
| Height Seated (Max) | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADSP-21477BCPZ-1A Overview
It is a kind of electronic component available in the 88-VFQFN Exposed Pad, CSP package.There is a packaging method of Tray provided with it.With its association with Floating Point, it is suitable for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.The operation of the device at the temperature of -40°C~85°C TA ensures the normal operation of the device.This refers to the analog voltage range that can be input or output from 3.30V.SHARC? series digital signal processors contain this digital signal processor.In order to use it, it has 88 terminations.The voltage supplied by 1.2V is used to operate it.88 component pins are present.Its configuration includes 88 pins.With its base part number ADSP-21477, it is possible to identify a number of related parts.It is specifically designed to operate with the frequency of 200MHz.As a mounting method, it uses Surface Mount.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.This device can be powered by voltages as low as 1.14V.A maximum voltage of 1.26V can be provided to this device.1.2V is the supply voltage for this device.It can store 2MB data in its memory.In 1 UART channels, the data format and transmission speeds may be customi1ed for asynchronous serial communication.To measure time and count events externally, 2 timers/counters are used.SHARC-architecture is used in this processor core.The device is equipped with 16 I/Os.
ADSP-21477BCPZ-1A Features
Supplied in the 88-VFQFN Exposed Pad, CSP package
Operating supply voltage of 1.2V
2 timers/counters
16 I/Os
ADSP-21477BCPZ-1A Applications
There are a lot of Analog Devices Inc. ADSP-21477BCPZ-1A DSP applications.
- Video coding, audio coding
- Infinite impulse response filters
- Smart phones
- Consumer electronic gadgets
- Digital camera
- Geophysical processing
- Digital image processing
- Automobile electronic gadgets
- Automobiles
- Speech processing
