ADSP-21478BCPZ-1A
| Parameters | |
|---|---|
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 24 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| RAM (words) | 98304 |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 3Mbit |
| Clock Rate | 200MHz |
| Height Seated (Max) | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 88-VFQFN Exposed Pad, CSP |
| Number of Pins | 88 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 88 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21478 |
| Pin Count | 88 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 3MB |
| Number of I/O | 16 |
| RAM Size | 384kB |
ADSP-21478BCPZ-1A Overview
An electronic component available in package 88-VFQFN Exposed Pad, CSP.A packaging way of Tray is provided.Due to its membership in Floating Point, it is ideally suited for a wide range of uses.Surface Mount is mounted in a manner that allows it to be moved.It is recommended that the device operate at a temperature of -40°C~85°C TA to ensure its normal operation.It refers to the analog voltage range of 3.30V that may be input or output.The SHARC? series incorporates this digital signal processor.In terms of its uses, it has 88 terminations.The supply voltage is 1.2V.There are pins on the 88 component.Its configuration includes 88 pins.By using its base part number of ADSP-21478, many related parts can be identified.In order for the device to operate at the frequency of 266MHz, it has been designed specifically.As a mounting method, it uses Surface Mount.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.In order to power this device, a voltage as low as 1.14V needs to be supplied.A maximum voltage of 1.26V can be provided to this device.It operates with the supply voltage of 1.2V.This device is able to store 3MB data in its memory.1 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.External events are tracked and measured with 2 timers/counters.SHARC-architecture is used in this processor core.The device has 16 I/Os.
ADSP-21478BCPZ-1A Features
Supplied in the 88-VFQFN Exposed Pad, CSP package
Operating supply voltage of 1.2V
2 timers/counters
16 I/Os
ADSP-21478BCPZ-1A Applications
There are a lot of Analog Devices Inc. ADSP-21478BCPZ-1A DSP applications.
- Electronic information engineering
- Digital hardware
- Streaming videos
- Digital camera
- Biomedical engineering
- Finite impulse response digital filters
- Smart phones
- Financial signals
- Tomography technology
- Audio synthesis
