ADSP-21488KSWZ-4B
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Floating Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21488 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Interface | EBI/EMI, DAI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.05V |
| Memory Size | 5MB |
| Number of I/O | 16 |
| RAM Size | 384kB |
| Memory Type | RAM |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Non-Volatile Memory | External |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 3Mbit |
| Number of SPI Channels | 1 |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
ADSP-21488KSWZ-4B Overview
In electronic terms, it is a type of component that comes in the package of type 176-LQFP Exposed Pad .A packaging way of Tray is provided.With its association with Floating Point, it is suitable for a wide range of applications.The mounting is carried out in the direction of Surface Mount.By operating the device at the temperature of 0°C~70°C TA, a normal operation is ensured.It refers to the analog voltage range of 3.30V that may be input or output.It is a part of the SHARC? series of digital signal processors.For its use, it has 176 terminations.A voltage of 1.1V is used as the supply voltage.Pins are available on the 176 component.The configuration of this board includes 176 pins.With its base part number ADSP-21488, it is possible to identify a number of related parts.Specifically, the device is designed to operate at a frequency of 400MHz.Mounting is accomplished using Surface Mount.This device can be classified into the subcategory Digital Signal Processors based on its specific characteristics.It is possible to supply as low a voltage as 1.05V to this device.This device can handle a maximum voltage of 3.47V.It operates with the supply voltage of 3.3V.Using this device, you can store 5MB data.Timer/counters with a 3-axis measure time and count external events.SHARC architecture is used for this processor core.Device features 16 I/Os.The memory type it uses is RAM.Embedded systems in this system use 1 SPI channels for short-distance communication.
ADSP-21488KSWZ-4B Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
3 timers/counters
16 I/Os
ADSP-21488KSWZ-4B Applications
There are a lot of Analog Devices Inc. ADSP-21488KSWZ-4B DSP applications.
- Digital image processing, data compression
- Monitoring equipment
- Sonar
- Computer vision technology
- Digital camera
- Compression of videos
- Speech processing and recognition
- Vehicle electronics
- 3D tomography and imaging processing
- Machinery and equipment
