ADSP-21489KSWZ-3B
| Parameters | |
|---|---|
| Memory Type | ROMless |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Density | 4 Mb |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of I2C Channels | 1 |
| Non-Volatile Memory | External |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Clock Rate | 350MHz |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Floating Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Frequency | 450MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21489 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | EBI/EMI, DAI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.05V |
| Number of I/O | 16 |
| RAM Size | 640kB |
ADSP-21489KSWZ-3B Overview
It is a type of electronic component available in package 176-LQFP Exposed Pad.Tray packaging is provided for it.With its association with Floating Point, it is suitable for a wide range of applications.The device is attached in a way that faces Surface Mount.The operation of the device at the temperature of 0°C~70°C TA ensures the normal operation of the device.3.30V refers to the range of analog voltages that can be input or output.The SHARC? series incorporates this digital signal processor.For its use, it has 176 terminations.Using 1.1V as the supply voltage, it operates.There are 176 component pins.There are 176 pins in its configuration.With its base part number ADSP-21489, it is possible to identify a number of related parts.In order for the device to operate at 450MHz frequency, there is a specific design.Using Surface Mount as a mounting method, it is mounted.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.This device operates at a voltage as low as 1.05V.It is capable of receiving a maximum voltage of 3.47V.In order for it to operate, 3.3V is the supply voltage.External events are tracked and measured with 3 timers/counters.It is based on the SHARC architecture.16 I/Os are included with the device.It uses ROMless as its memory type.The short-distance communication of this embedded system is performed over 2 SPI channels.In order to establish communication between two or more ICs, 1 I2C channels are used.
ADSP-21489KSWZ-3B Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
3 timers/counters
16 I/Os
ADSP-21489KSWZ-3B Applications
There are a lot of Analog Devices Inc. ADSP-21489KSWZ-3B DSP applications.
- Sonar
- Tomography technology
- Infrared
- Geophysical processing
- Vibration signal processing
- Seismology
- Processing system
- Speech signal processing
- Image compression
- Encoding/broadcast
