ADSP-21489KSWZ-4B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21489 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Interface | EBI/EMI, DAI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.05V |
| Number of I/O | 16 |
| RAM Size | 640kB |
| Memory Type | ROMless |
| Number of Bits | 32 |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of I2C Channels | 1 |
| Non-Volatile Memory | External |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21489KSWZ-4B Overview
It is a kind of electronic component that comes in a package of 176-LQFP Exposed Pad.Tray is the packaging method provided.As a member of Floating Point, it is ideally suitable for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.By operating the device at the temperature of 0°C~70°C TA, a normal operation is ensured.The analog voltage range of 3.30V refers to the voltage that can be input or ouput.There are several digital signal processors in the SHARC? series, including this one.The terminations for its uses are 176.Using 1.1V as the supply voltage, it operates.Pins are available on the 176 component.In its configuration, 176 pins can be found.The base part number ADSP-21489 allows identification of a wide range of related parts.A specific design is present for the device in order for it to operate at the frequency of 400MHz.Surface Mount is used as the mounting method.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.This device operates at a voltage as low as 1.05V.Devices like this can be powered by voltages up to 3.47V.Using 3.3V as the supply voltage, it operates.Timer/counters for measuring and counting external events are called 3 timers or counters.A SHARC-architecture processor core is used here.It is equipped with 16 I/Os.It adopts ROMless as its memory type.In the device are 32 pieces of information.To communicate over short distances, this embedded system uses 2 SPI channels.The 1 I2C channel is used to establish communication between more Ics.
ADSP-21489KSWZ-4B Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
3 timers/counters
16 I/Os
ADSP-21489KSWZ-4B Applications
There are a lot of Analog Devices Inc. ADSP-21489KSWZ-4B DSP applications.
- Real-time effects
- Automatic analysis system of EEG or ECG
- Tomography technology
- Sonar
- Other sensor array processing
- Receivers
- Telephone conversations
- Remote sensing image processing technology
- Monitoring equipment
- Airplanes
