ADSP-2181BST-115
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 28.8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 100mA |
| Bit Size | 16 |
| Frequency (Max) | 28.8MHz |
| Data Bus Width | 16b |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ADSP-2181BST-115 Overview
In electronic terms, it is a type of component that comes in the package of type TQFP .Bulk packaging is provided for it.In terms of its uses, it has 128 terminations.The supply voltage is 5V.Pins are available for 128 components.128 pins can be found in its configuration.In order for the device to operate at 28.8MHz frequency, there is a specific design.The mounting method of the device is Surface Mount.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.Devices like this can be powered with as little as 4.5V volts.This device can handle a maximum voltage of 5.5V.5V is the supply voltage for this device.There is an electric supply from 5V.It is also possible to add additional features to 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION with the help of this electronic component.The uPs/uCs/peripheral ICs of the device employ the DIGITAL SIGNAL PROCESSOR, OTHER type.Operating temperatures should be lower than 85°C.-40°C should be exceeded as the operating temperature.Industrial environments use 1 timers to provide accurate feedback and event activation.External sources are causing 4 interrupts.A frequency of less than 28.8MHz should be used.To prevent CPU overload, 2 DMA channels are used to transfer data.Serial 2 I/Os are used to communicate data between devices.
ADSP-2181BST-115 Features
Supplied in the TQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2181BST-115 Applications
There are a lot of Analog Devices, Inc. ADSP-2181BST-115 DSP applications.
- Sound navigation and ranging systems
- Geoscience signal processing
- Streaming videos
- Digital camera
- Infrared
- Audio
- Financial signals
- Digital communications
- Medical imaging
- Finite impulse response digital filters
