ADSP-2181BST-133
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 33.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 100mA |
| Bit Size | 16 |
| Frequency (Max) | 33.3MHz |
| Data Bus Width | 16b |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Capacitance - Input | 8pF |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2181BST-133 Overview
In the TQFP package, it is a type of electronic component.Packaging is provided in the form of Bulk.The use of it is terminated by 128.Using 5V as the supply voltage, it operates.Pins are located on the 128 component.The configuration of the device includes 128 pins.A specific design is present for the device in order for it to operate at the frequency of 33.3MHz.Surface Mount is used as the mounting method.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.Devices like this can be powered with as little as 4.5V volts.The maximum voltage for this device is 5.5V.A supply voltage of 5V is required for its operation.There is an electric supply from 5V.It can also provide more features of 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION.The uPs/uCs/peripheral ICs of the device employ the DIGITAL SIGNAL PROCESSOR, OTHER type.It is recommended to operate at a lower temperature than 85°C.The operating temperature should be in excess of -40°C.In industrial environments, 1 timers provide accurate feedback and event activation.External sources are causing 4 interrupts.The maximum value of its frequency should be kept below 33.3MHz.2 DMA channels transfer data without overloading the CPU.2 serial I/Os are used for communicating data between devices.
ADSP-2181BST-133 Features
Supplied in the TQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2181BST-133 Applications
There are a lot of Analog Devices, Inc. ADSP-2181BST-133 DSP applications.
- Sonar
- Electronic information engineering
- Remote sensing image processing technology
- Speech signal processing
- Smart camera
- Streaming videos
- Digital camera
- Audio signal
- Scene analysis technology
- TVs
