ADSP-2181KS-115
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 28.8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 100mA |
| Bit Size | 16 |
| Frequency (Max) | 28.8MHz |
| Data Bus Width | 16b |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 4.07mm |
| Length | 28mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ADSP-2181KS-115 Overview
The PQFP package contains these electronic components.It has a packaging style of Bulk.The 128 terminations are used for its uses.It works with a voltage of 5V as a supply voltage.128 components have pins.In its configuration, 128 pins can be found.In order for the device to operate at 28.8MHz frequency, there is a specific design.A Surface Mount mounting method is used for its mounting.This device can be classified into the subcategory Digital Signal Processors based on its specific characteristics.In order to power this device, a voltage as low as 4.5V needs to be supplied.This device can be powered by 5.5V voltages.Using 5V as the supply voltage, it operates.There is an electric supply from 5V.This electronic part can provide more features for 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION.The uPs/uCs/peripheral ICs of the device employ the DIGITAL SIGNAL PROCESSOR, OTHER type.It is recommended to keep the operating temperature below 70°C.Over 0°C should be the operating temperature.There are 1 timers programmed to provide accurate feedback and event activation in industrial environments.The external source of 4 interrupts is causing 4 interrupts.It should have a maximum frequency below 28.8MHz.Using 2 DMA channels, data can be transferred without overloading the CPU.Devices communicate with each other through serial 2 I/Os.
ADSP-2181KS-115 Features
Supplied in the PQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2181KS-115 Applications
There are a lot of Analog Devices, Inc. ADSP-2181KS-115 DSP applications.
- Radio detection and rangin systems
- Video coding, audio coding
- Infrared
- Streaming videos
- TVs
- Audio synthesis
- Consumer electronic gadgets
- Digital communications
- Biomedical engineering
- Speech signal processing
