ADSP-2181KS-133
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 33.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 100mA |
| Bit Size | 16 |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 24 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Ambient Temperature Range High | 70°C |
| Number of DMA Channels | 2 |
| Height | 4.07mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
ADSP-2181KS-133 Overview
This is an electronic component with a PQFP package.It is provided with a packaging way of Bulk.In terms of its uses, it has 128 terminations.This device is powered by 5V's supply voltage.The 128 component has pins.This configuration contains 128 pins.A specific design is present for the device in order for it to operate at the frequency of 33.3MHz.The mounting method of the device is Surface Mount.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.The minimum voltage supplied to this device is as low as 4.5V.5.5V is the maximum voltage that can be supplied to this device.5V is the supply voltage for this device.5V electric power powers it.Electronic parts can also add more features to 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION.DIGITAL SIGNAL PROCESSOR, OTHER is used as uPs/uCs/peripheral ICs.70°C should be lower than the operating temperature.There should be a temperature difference over 0°C during operation.There are 1 timers programmed to provide accurate feedback and event activation in industrial environments.There are 4 interrupts caused by an external source.It uses 2 DMA channels to transfer data without overloading the CPU.A 2 serial I/O communicates data between two devices.
ADSP-2181KS-133 Features
Supplied in the PQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2181KS-133 Applications
There are a lot of Analog Devices, Inc. ADSP-2181KS-133 DSP applications.
- Airplanes
- Smart camera
- Infrared
- Audio signal
- Tomography technology
- Digital image processing, data compression
- Electronic information engineering
- Voice recognition
- Video coding, audio coding
- Financial signals
