ADSP-2181KST-160
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 12mA |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Bit Size | 16 |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 24 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Capacitance - Input | 8pF |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2181KST-160 Overview
In the LQFP package, it is a type of electronic component.It has a packaging style of Bulk.The terminations for its uses are 128.This device is powered by 5V's supply voltage.Pins are present on the 128 component.In its configuration, 128 pins can be found.In order for the device to operate at the frequency of 40MHz, it has been designed specifically.A Surface Mount mounting method is used for its mounting.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.4.5V is the minimum voltage that can be supplied to this device.It is capable of receiving a maximum voltage of 5.5V.The device operates on a voltage of 5V as its supply voltage.A 5V electric power source is used to power it.A DIGITAL SIGNAL PROCESSOR, OTHER type UP/UC/Peripheral IC is employed in its uP/UC/Peripheral ICs.The operating temperature should be lower than 70°C.There should be a temperature difference over 0°C during operation.Industrial environments have 1 timers that provide accurate feedback and trigger events.There are 4 interrupts caused by external factors.In order to transfer data without overloading the CPU, 2 DMA channels are used.Using 2 serial interfaces, data can be communicated between devices.
ADSP-2181KST-160 Features
Supplied in the LQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2181KST-160 Applications
There are a lot of Analog Devices, Inc. ADSP-2181KST-160 DSP applications.
- Geoscience signal processing
- Computers and laptop
- Radar
- Digital communications
- Computer vision technology
- Digital camera
- Medical imaging
- Seismology
- Consumer electronic gadgets
- Biometrics
