ADSP-2183BST-115
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 28.8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 54mA |
| Bit Size | 16 |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 24 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2183BST-115 Overview
This is an electronic component with a LQFP package.Packaging way Bulk is provided.In order to use it, it has 128 terminations.Using 3.3V as the supply voltage, it operates.128 component pins are present.In its configuration, 128 pins can be found.This device is designed specifically to operate at frequency 28.8MHz.Mounting is accomplished using Surface Mount.According to its specific characteristics, this device is classified in the subcategory Digital Signal Processors.In this device, the minimum voltage is 3V.3.6V is the maximum voltage that can be supplied to this device.In order for it to operate, 3.3V is the supply voltage.For its uPs/uCs/peripheral ICs, DIGITAL SIGNAL PROCESSOR, OTHER is used.Lower than 85°C should be the operating temperature.Over -40°C should be the operating temperature.A 1 timer can give accurate feedback and activate events in industrial settings.An external source is causing 4 interrupts.The CPU is not overloaded by data transfer via 2 DMA channels.Data is communicated between devices using 2 serial I/Os.
ADSP-2183BST-115 Features
Supplied in the LQFP package
Operating supply voltage of 3.3V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2183BST-115 Applications
There are a lot of Analog Devices, Inc. ADSP-2183BST-115 DSP applications.
- Infrared
- Vibration signal processing
- Encoding/broadcast
- Automobile electronic gadgets
- Image signal processing
- Vehicle electronics
- Radar
- Automobiles
- Digital image processing
- Medical imaging
