ADSP-2183BST-133
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 33.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 30mA |
| Bit Size | 16 |
| Frequency (Max) | 33.3MHz |
| Data Bus Width | 16b |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Capacitance - Input | 8pF |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| RoHS Status | RoHS Compliant |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
ADSP-2183BST-133 Overview
It is a type of electronic component available in package LQFP.Packaging way Bulk is provided.The use of it is terminated by 128.The voltage supplied by 3.3V is used to operate it.Pins are available on the 128 component.In its configuration, 128 pins can be found.A specific design is present for the device in order for it to operate at the frequency of 33.3MHz.It adopts Surface Mount as its mounting way.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.This device operates at a voltage as low as 3V.A maximum voltage of 3.6V can be provided to this device.This device is powered by 3.3V's supply voltage.This device utiliDIGITAL SIGNAL PROCESSOR, OTHERes the DIGITAL SIGNAL PROCESSOR, OTHER type of uPs, uCs, and peripheral ICs.The operating temperature should be lower than 85°C.A temperature exceeding -40°C is recommended for operation.1 timers are used in industrial environments to provide accurate feedback and event activation.External sources cause 4 interrupts.Its frequency should remain below 33.3MHz.Data is transferred using 2 DMA channels without overloading the CPU.2 serial I/Os are used for communicating data between devices.
ADSP-2183BST-133 Features
Supplied in the LQFP package
Operating supply voltage of 3.3V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2183BST-133 Applications
There are a lot of Analog Devices, Inc. ADSP-2183BST-133 DSP applications.
- Biomedical engineering
- Control systems
- Scene analysis technology
- Processing system
- Fourier transform
- Receivers
- TVs
- Geoscience signal processing
- Vibration signal processing
- Smart camera
