ADSP-2185BST-133
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 12.4mA |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Bit Size | 16 |
| Frequency (Max) | 33.3MHz |
| Data Bus Width | 16b |
| Address Bus Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| RAM (words) | 16384 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn85Pb15) - with Silver (Ag) barrier |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 33.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
ADSP-2185BST-133 Overview
This is an electronic component with a LQFP package.It is provided with a packaging way of Bulk.In terms of its uses, it has 100 terminations.5V is the supply voltage.Pins are present on the 100 component.Its configuration includes 100 pins.The device is specifically designed to operate at the frequency of 33.3MHz.Mounting is accomplished using Surface Mount.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.This device requires a minimum voltage of 4.5V.This device can be powered by 5.5V voltages.The device operates with a supply voltage of 5V.A 5V electric power source is used to power it.This device uses DIGITAL SIGNAL PROCESSOR, OTHER for uPs, uCs, and peripheral ICs.Ideally, the operating temperature should be below 85°C.The operating temperature should be in excess of -40°C.Its maximum frequency should be kept below 33.3MHz.
ADSP-2185BST-133 Features
Supplied in the LQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
ADSP-2185BST-133 Applications
There are a lot of Analog Devices, Inc. ADSP-2185BST-133 DSP applications.
- TVs
- Consumer electronic gadgets
- Computer vision technology
- Statistical signal processing
- Vehicle electronics
- Audio synthesis
- Biomedical treatment
- Speech processing and recognition
- Audio
- Spectral density estimation
