ADSP-2185KST-115
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn85Pb15) - with Silver (Ag) barrier |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 28.8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 12.4mA |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Bit Size | 16 |
| Frequency (Max) | 28.8MHz |
| Data Bus Width | 16b |
| Address Bus Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| RAM (words) | 16384 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2185KST-115 Overview
In the LQFP package, it is a type of electronic component.Packaging is provided in the form of Bulk.In terms of its uses, it has 100 terminations.It is supplied with voltage by 5V.100 components have pins.In its configuration, it contains 100 pins.The device operates at the frequency of 28.8MHz in accordance with a specific design.Using Surface Mount as a mounting method, it is mounted.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.This device requires a minimum voltage of 4.5V.It is capable of receiving a maximum voltage of 5.5V.This device is powered by 5V's supply voltage.The electric power supply is 5V.A DIGITAL SIGNAL PROCESSOR, OTHER-type uPs/UCS/Peripheral ICs is used in this system.The operating temperature should be lower than 70°C.Over 0°C, the operating temperature should be maintained.Its frequency should remain below 28.8MHz.
ADSP-2185KST-115 Features
Supplied in the LQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
ADSP-2185KST-115 Applications
There are a lot of Analog Devices, Inc. ADSP-2185KST-115 DSP applications.
- Voice recognition
- Real-time effects
- Other sensor array processing
- Dam design
- Audio
- Encoding/broadcast
- Biomedical treatment
- Sound navigation and ranging systems
- Scene analysis technology
- House construction
