ADSP-2186BST-115
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn85Pb15) - with Silver (Ag) barrier |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 28.8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 40kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Bit Size | 16 |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 24 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 8000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2186BST-115 Overview
It is a kind of electronic component available in the LQFP package.Bulk is the packaging method provided.For its use, it has 100 terminations.Using 5V as the supply voltage, it operates.Pins are present on the 100 component.The configuration of the device includes 100 pins.A specific design is present for the device in order for it to operate at the frequency of 28.8MHz.A Surface Mount mounting method is used for its mounting.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.The minimum voltage supplied to this device is as low as 4.5V.5.5V is the maximum voltage that can be supplied to this device.A supply voltage of 5V is required for its operation.5V electric power supplies the facility.DIGITAL SIGNAL PROCESSOR, OTHER is used as the uPs/uCs/peripheral IC type.A lower operating temperature than 85°C is recommended.Over -40°C, the operating temperature should be maintained.1 timers are used in industrial environments to provide accurate feedback and event activation.External sources cause 4 interrupts.2 DMA channels transfer data without overloading the CPU.Data is transferred between devices using serial 2 I/Os.
ADSP-2186BST-115 Features
Supplied in the LQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2186BST-115 Applications
There are a lot of Analog Devices, Inc. ADSP-2186BST-115 DSP applications.
- Image compression
- Tomography technology
- Boats
- Infrared
- Biomedical engineering
- Geophysical processing
- Fourier transform
- Audio signal
- Other sensor array processing
- Radio detection and rangin systems
