ADSP-2186KST-133
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn85Pb15) - with Silver (Ag) barrier |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 33.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 40kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Number of Bits | 16 |
| Bit Size | 16 |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 24 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 8000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2186KST-133 Overview
It is a type of electronic component available in package LQFP.Packaging is provided in the form of Bulk.In order to use it, it has 100 terminations.5V provides the supply voltage for it.100 component pins are present.The configuration of this board includes 100 pins.33.3MHz is a frequency at which the device operates according to a specific design.Mounting is accomplished using Surface Mount.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.4.5V is the minimum voltage that can be supplied to this device.It can be supplied with a maximum voltage of 5.5V.The device operates on a voltage of 5V as its supply voltage.The electric power supply is 5V.A DIGITAL SIGNAL PROCESSOR, OTHER type UP/UC/Peripheral IC is employed in its uP/UC/Peripheral ICs.Lower than 70°C should be the operating temperature.The operating temperature should be in excess of 0°C.It is possible to program 1 timers in industrial environments to provide accurate feedback and trigger events.An external source is causing 4 interrupts.This device stores 16 information.Using 2 DMA channels, data can be transferred without overloading the CPU.In serial 2 I/Os, data is transmitted between devices.
ADSP-2186KST-133 Features
Supplied in the LQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2186KST-133 Applications
There are a lot of Analog Devices, Inc. ADSP-2186KST-133 DSP applications.
- Audio signal
- Automobile electronic gadgets
- Biometrics
- Automobiles
- Boats
- Automatic analysis system of EEG or ECG
- Electronic information engineering
- Signal processing for telecommunications
- Encoding/broadcast
- Smart camera
