ADSP-2186MKSTZ-300
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | ADSP-21xx |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Type | Fixed Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 75MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-2186 |
| Pin Count | 100 |
| Operating Supply Voltage | 2.5V |
| Power Supplies | 2.52.5/3.3V |
| Interface | Host Interface, Serial Port |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.37V |
| RAM Size | 40kB |
| Memory Type | RAM |
| Number of Bits | 16 |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 1 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 2.50V |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-2186MKSTZ-300 Overview
In electronic terms, it is a type of component that comes in the package of type 100-LQFP .A packaging way of Tray is provided.With its association with Fixed Point, it is suitable for a wide range of applications.The device is attached in a way that faces Surface Mount.The operation of the device at the temperature of 0°C~70°C TA ensures the normal operation of the device.This refers to the analog voltage range that can be input or output from 3.30V.The ADSP-21xx series includes this digital signal processor.The use of it is terminated by 100.It operates with the supply voltage of 2.5V.There are 100 component pins.An overview of its configuration can be found in the section on 100 pins.Many related parts can be identified by using the ADSP-2186 part number as a base.It is specifically designed to operate with the frequency of 75MHz.In order to mount it, it utiliSurface Mountes the Surface Mount method.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.This device requires a minimum voltage of 2.37V.The maximum voltage for this device is 3.6V.It operates with the supply voltage of 2.5V.2.52.5/3.3V electric power powers it.To measure time and count events externally, 1 timers/counters are used.It adopts RAM as its memory type.Data is stored in the device in 16 formats.
ADSP-2186MKSTZ-300 Features
Supplied in the 100-LQFP package
Operating supply voltage of 2.5V
1 timers/counters
ADSP-2186MKSTZ-300 Applications
There are a lot of Analog Devices Inc. ADSP-2186MKSTZ-300 DSP applications.
- Biometrics
- Speech signal processing
- Image compression
- Smart camera
- Tomography technology
- 3D tomography and imaging processing
- Geoscience signal processing
- TVs
- Airplanes
- Telephone conversations
