ADSP-2186NKST-320
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.81.8/3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.71V |
| RAM Size | 40kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Number of Bits | 16 |
| Bit Size | 16 |
| Frequency (Max) | 80MHz |
| Data Bus Width | 16b |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| RAM (words) | 8192 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2186NKST-320 Description
The microprocessor is convenient for international shipping since it is packaged in LQFP. High reliability is achieved using advanced packaging method Bulk. uPs/uCs/Peripheral ICs are a DIGITAL SIGNAL PROCESSOR, OTHER. There are 100 terminations totally. A 1.8V voltage supply should be used to turn on and run the cpu microprocessor. This microprocessor has an architecture of 16 bits. There is 80MHz frequency set for the CPU. 100 pin functions are described in the datasheets. An example of a Digital Signal Processors embedded microprocessor. In order to transfer data, there is a bandwidth of 16b. Temperatures above 70°C should not allow the embedded microprocessor to operate. Injection of 100 pins into the body of the embedded microprocessor is carried out. This CPU is widely used in many applications because of its Surface Mount mount. CPU frequency will reach 80MHz at the top. According to datasheets, the micro processor requires 1.81.8/3.3V power sources. There is 40kB RAM (Random Access Memory) built in. Microprocessors should never be supplied with voltages above 3.6V in normalcircumstances. The lowest voltage that should be applied to the micro processor is 1.71V. Conducting with a 16-bit address is possible with the CPU microprocessor.
ADSP-2186NKST-320 Features
16-Bit Structure
16b-Bit Data Bus Width
40kB RAM
ADSP-2186NKST-320 Applications
There are a lot of Analog Devices, Inc. ADSP-2186NKST-320 Microprocessor applications.
8. Navigation control field
Calculators
Firewalls
Paper shredders
Data acquisition and control
Industrial control field
Petrochemical
3D printers
Day to day life field
Mice
