ADSP-BF504KCPZ-4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 88-VFQFN Exposed Pad, CSP |
| Number of Pins | 88 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 88 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF504 |
| Pin Count | 88 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.31.8/3.3V |
| Interface | CAN, EBI/EMI, I2C, IrDA, PPI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.47V |
| Min Supply Voltage | 1.1V |
| Memory Size | 68kB |
| Number of I/O | 35 |
| RAM Size | 64kB |
| Bit Size | 32 |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.31V |
| Height Seated (Max) | 0.85mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF504KCPZ-4 Overview
In the 88-VFQFN Exposed Pad, CSP package, it is a type of electronic component.The packaging way is Tray.As a member of Fixed Point, it is ideally suitable for a wide range of applications.The mounting is carried out in the direction of Surface Mount.It is recommended that the device operate at a temperature of 0°C~70°C TA to ensure its normal operation.1.8V 2.5V 3.3V refers to the range of analog voltages that can be input or output.The Blackfin? series includes this digital signal processor.The 88 terminations are used for its uses.3V is the supply voltage.Pins are available on the 88 component.There are 88 pins in its configuration.With its base part number of ADSP-BF504, many related parts can be identified.This device is designed specifically to operate at frequency 400MHz.A Surface Mount mounting method is used for its mounting.The characteristics of this device allow it to be placed in the subcategory of Microprocessors.This device requires a minimum voltage of 1.1V.This device can be powered by 1.47V voltages.68kB data can be stored in the memory of this device.A 1.31.8/3.3V electric power source is used to power it.It is possible to configure the data format and transfer speed of 2 UART channels for synchronous serial communication.To measure time and count events externally, 9 timers/counters are used.The architecture of this processor core is Blackfin.35 I/Os are present on the device.
ADSP-BF504KCPZ-4 Features
Supplied in the 88-VFQFN Exposed Pad, CSP package
9 timers/counters
35 I/Os
ADSP-BF504KCPZ-4 Applications
There are a lot of Analog Devices Inc. ADSP-BF504KCPZ-4 DSP applications.
- Fourier transform
- Biometrics
- Monitoring equipment
- Automatic analysis system of EEG or ECG
- Telephone conversations
- Radio detection and rangin systems
- Digital image processing, data compression
- Digital communications
- Speech processing
- Scene analysis technology
