ADSP-BF512BSWZ-4F4
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 176 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Base Part Number | ADSP-BF512 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, PPI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 7.1V |
| Min Supply Voltage | 1.164V |
| Memory Size | 1MB |
| Number of I/O | 40 |
| RAM Size | 48kB |
| Memory Type | FLASH |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | FLASH (4Mbit) |
| Voltage - Core | 1.30V |
| On Chip Data RAM | 116kB |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF512BSWZ-4F4 Overview
It is a type of electronic component available in package 176-LQFP Exposed Pad.The packaging way is Tray.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.The mounting of the device is done in the direction of Surface Mount.Operating at the temperature of -40°C~85°C TA ensures its normal operation.As the name implies, the analog voltage range of 1.8V 2.5V 3.3V refers to the voltage that can be inserted or removed.As part of the Blackfin? series, this digital signal processor is included.The terminations for its uses are 176.It works with a voltage of 1.4V as a supply voltage.176 components have pins.The configuration of this board includes 176 pins.Based on its base part number of ADSP-BF512, many ralated parts can be found.To operate at 400MHz frequency, the device has a specific design.The specific characteristics of this device can be categoriMicroprocessorsed within the Microprocessors subcategory.This device can be powered by voltages as low as 1.164V.Devices like this can be powered by voltages up to 7.1V.Using 3.3V as the supply voltage, it operates.In its memory, this device can store 1MB data.Timers and counters that measure time and count external events are also called 9 timers and counters.An architecture of Blackfin is adopted by this processor core.40 I/Os are included with the device.The memory type it uses is FLASH.For communication between more ICs, there are 2 I2C channels.Using digital means, analog circuits can be controlled via 8 PWM channels.
ADSP-BF512BSWZ-4F4 Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
9 timers/counters
40 I/Os
ADSP-BF512BSWZ-4F4 Applications
There are a lot of Analog Devices Inc. ADSP-BF512BSWZ-4F4 DSP applications.
- Automobiles
- Consumer electronic gadgets
- Digital communications
- Telephone conversations
- Smart camera
- Audio signal
- Boats
- Receivers
- 3D tomography and imaging processing
- Control systems
