ADSP-BF512KSWZ-4F4
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 176 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Base Part Number | ADSP-BF512 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, PPI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 7.1V |
| Min Supply Voltage | 1.164V |
| Memory Size | 1MB |
| Number of I/O | 40 |
| RAM Size | 48kB |
| Memory Type | FLASH |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | FLASH (4Mbit) |
| Voltage - Core | 1.30V |
| On Chip Data RAM | 116kB |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF512KSWZ-4F4 Overview
It is a type of electronic component available in package 176-LQFP Exposed Pad.Tray is the packaging method provided.With its association with Fixed Point, it is suitable for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.This refers to the analog voltage range that can be input or output from 1.8V 2.5V 3.3V.The Blackfin? series contains this digital signal processor.The uses of this product can be terminated with 176.The voltage supplied by 1.4V is used to operate it.Pins are located on the 176 component.176 pins can be found in its configuration.Many related parts can be identified by using the ADSP-BF512 part number as a base.The device is specifically designed to operate at the frequency of 400MHz.Based on its specific characteristics, this device can be classified into the subcategory of Microprocessors.In order to power this device, a voltage as low as 1.164V needs to be supplied.The maximum voltage for this device is 7.1V.The device operates on a voltage of 3.3V as its supply voltage.Its memory can store 1MB data.Timer/counters for measuring and counting external events are called 9 timers or counters.An architecture of Blackfin is adopted by this processor core.40 I/Os are included with the device.A FLASH memory type is used.The IICs communicate using 2 I2C channels.Digital circuits are controlled by 8 PWM channels.
ADSP-BF512KSWZ-4F4 Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
9 timers/counters
40 I/Os
ADSP-BF512KSWZ-4F4 Applications
There are a lot of Analog Devices Inc. ADSP-BF512KSWZ-4F4 DSP applications.
- Digital camera
- Audio
- Tomography technology
- Other sensor array processing
- Statistical signal processing
- Vehicle electronics
- Biometrics
- Biomedical engineering
- Streaming videos
- Electronic information engineering
