ADSP-BF522KBCZ-3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF522 |
| Pin Count | 289 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, I2C, PPI, SPI, SPORT, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.7V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| Speed | 300 MHz |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.30V |
| Clock Rate | 300MHz |
| Height Seated (Max) | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF522KBCZ-3 Overview
It is a type of electronic component available in package 289-LFBGA, CSPBGA.Packaging method Tray is provided.The Fixed Point family provides a wide range of applications.It is mounted in the way of Surface Mount.Keeping the device at the temperature of 0°C~70°C TA will ensure that it runs as it should.1.8V 2.5V 3.3V refers to the range of analog voltages that can be input or output.The Blackfin? series contains this digital signal processor.For its use, it has 289 terminations.This device is powered by 1.8V's supply voltage.The 289 component has pins.In its configuration, there are 289 pins.The base part number ADSP-BF522 can be used to identify many associated parts.400MHz is a frequency at which the device operates according to a specific design.As a mounting method, it uses Surface Mount.The device can be classified as part of the Microprocessors subcategory based on its specific characteristics.This device can be powered by voltages as low as 1.7V.The maximum voltage supplied to this device amounts to 3.6V.Using 3.3V as the supply voltage, it operates.Data can be stored in this device's memory in 132kB format.2 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.Timer/counters with a 9-axis measure time and count external events.Blackfin-architecture is used in this processor core.48 I/Os are available on the device.
ADSP-BF522KBCZ-3 Features
Supplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF522KBCZ-3 Applications
There are a lot of Analog Devices Inc. ADSP-BF522KBCZ-3 DSP applications.
- Voice recognition
- Processing system
- Control systems
- Audio compression
- Digital camera
- Receivers
- Vehicle electronics
- Speech signal processing
- Infrared
- Image compression
