ADSP-BF522KBCZ-4C2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF522 |
| Pin Count | 289 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, I2C, PPI, SPI, SPORT, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.30V |
| Height Seated (Max) | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF522KBCZ-4C2 Overview
In the 289-LFBGA, CSPBGA package, it is a type of electronic component.Packaging is provided in the form of Tray.Due to its Fixed Point membership, it is ideal for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.It is recommended that the device operate at a temperature of 0°C~70°C TA to ensure its normal operation.It refers to the analog voltage range of 1.8V 2.5V 3.3V that may be input or output.The Blackfin? series incorporates this digital signal processor.Its uses have 289 terminations.The voltage supplied by 3.3V is used to operate it.There are pins on the 289 component.This configuration contains 289 pins.With its base part number ADSP-BF522, it is possible to identify a number of related parts.The device is specifically designed to operate at the frequency of 400MHz.Surface Mount is the method of mounting it.Based on its specific characteristics, this device can be classified into the subcategory of Microprocessors.It is possible to supply as low a voltage as 1.8V to this device.This device can handle a maximum voltage of 3.6V.It operates with the supply voltage of 3.3V.In its memory, this device can store 132kB data.It is possible to configure the data format and transfer speed of 2 UART channels for synchronous serial communication.Timer/counters for measuring and counting external events are called 9 timers or counters.Processor core Blackfin adopts the Blackfin architecture.A 48 I/O interface is present on the device.
ADSP-BF522KBCZ-4C2 Features
Supplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF522KBCZ-4C2 Applications
There are a lot of Analog Devices Inc. ADSP-BF522KBCZ-4C2 DSP applications.
- Remote sensing image processing technology
- Image signal processing
- Real-time effects
- Computer vision technology
- Computers and laptop
- Speech processing
- Automobile electronic gadgets
- Medical imaging
- Consumer electronic gadgets
- Scene analysis technology
